Switch Configuration Guide

clear port advertise Setting Auto-Negotiation and Advertised Ability
Enterasys Matrix DFE-Gold Series Configuration Guide 4-35
Parameters
Defaults
Atleastoneoptionalparametermustbespecified.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtosetfe.3.4toadvertise100BASE‐TXfullduplexoperation:
Matrix(rw)->set port advertise fe.3.4 100txfd
clear port advertise
Usethiscommandtoresetadvertisedabilitytothedefaultsettingononeormoreports.
Syntax
clear port advertise port-string [10t | 10tfd | 100tx | 100txfd | 1000x | 1000txfd
| 1000t | 1000tfd | pause | apause | spause | bpause]
Parameters
port-string
Specifiestheport(s)forwhichtosetadvertisedability.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntax
UsedintheCLI”onpage 4 ‐2.
10t (Optional)Advertises10BASE‐Thalfduplexmode.
10tfd (Optional)Advertises10BASE‐Tfullduplexmode.
100tx (Optional)Advertises100BASE‐TXhalf
duplexmode.
100txfd (Optional)Advertises100BASE‐TXfullduplexmode.
1000x (Optional)Advertises1000BASE‐X,‐LX,‐SX,‐CXhalfduplexmode.
1000xfd (Optional)Advertises1000BASE‐X,‐LX,‐SX,‐CXfullduplexmode.
1000t (Optional)Advertises1000BASE‐Thalf duplexmode.
1000tfd (Optional)Advertises1000BASE‐Tfullduplexmode.
pause (Optional)AdvertisesPAUSEforfull‐duplex
links.
apause (Optional)AdvertisesasymmetricPAUSEforfull‐duplexlinks.
spause (Optional)AdvertisessymmetricPAUSEforfull‐duplexlinks.
bpause (Optional)AdvertisesasymmetricandsymmetricPAUSEforfull‐
duplexlinks
port-string
Specifiesport(s)forwhichadvertisedabilitywillbereset.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntax
UsedintheCLI”onpage 4 ‐2.
10t (Optional)Clears10BASE‐Thalfduplexmodefromtheport’s
advertisedability.
10tfd (Optional)Clears10BASE‐Tfullduplexmode
fromtheport’s
advertisedability.