Switch Configuration Guide

Setting Auto-Negotiation and Advertised Ability set port advertise
4-34 Port Configuration
10BASE-T yes yes no
10BASE-TFD yes yes no
100BASE-TX yes yes no
100BASE-TXFD yes yes no
1000BASE-X no no no
1000BASE-XFD no no no
1000BASE-T no no no
1000BASE-TFD no no no
other no no yes
pause yes yes no
Apause no no no
Spause no no no
Bpause no no no
Table 4‐3providesanexplana tion ofthecommandoutput.
set port advertise
Usethiscommandtoenableordisableandtoconfiguretheadvertisedabilityononeormore
ports.
Syntax
set port advertise port-string [10t] [10tfd] [100tx] [100txfd] [1000x] [1000xfd]
[1000t] [1000tfd] [pause] [apause] [spause] [bpause]
Table 4-3 show port advertise Output Details
Output... What it displays...
capability Whether or not the port is capable of operating in the following modes:
• 10t - 10BASE-T half duplex mode
• 10tfd - 10BASE-T full duplex mode
• 100tx - 100BASE-TX half duplex mode
• 100txfd - 100BASE-TX full duplex mode
• 1000x - 1000BASE-X, -LX, -SX, -CX half duplex mode
• 1000xfd - 1000BASE-X, -LX, -SX, -CX full duplex mode
• 1000t - 1000BASE-T half duplex mode
• 1000tfd - 1000BASE-T full duplex mode
• other - Other modes.
• pause - PAUSE for full-duplex links
• apause - Asymmetric PAUSE for full-duplex links
• spause - Symmetric PAUSE for full-duplex links
• bpause - Asymmetric and Symmetric PAUSE for full-duplex links
advertised Whether or not the port is configured to advertise it is capable of
operating in the modes listed.
remote Whether this port’s link partner is advertising the listed mode.