Switch Configuration Guide

clear console bits Setting Console Port Properties
Enterasys Matrix DFE-Gold Series Configuration Guide 4-9
Parameters
Defaults
Ifport‐stringisnotspecified,bitspercharacterwillbesetforallconsoleports.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtosetbitspercharacterto5forconsoleportcom.1.1:
Matrix(rw)->set console bits 5 com.1.1
clear console bits
Usethiscommandtoclearthenumberofbitspercharacterforoneormoreconsoleports.
Syntax
clear console bits [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,bitspercharacterwillbeclearedforallconsoleports.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoclearbitspercharacterforconsoleportcom.1.1:
Matrix(rw)->clear console bits com.1.1
show console stopbits
Usethiscommandtodisplaytheconsoleportstopbitspercharacter.
Syntax
show console stopbits [port-string]
Parameters
num‐bits Specifiesthenumberofbitspercharacter.Validvaluesare5,6,7,and8.
port‐string (Optional)Setsbitspercharacterforspecificconsoleport(s).
port‐string (Optional)Clearsbitspercharacterforspecificconsoleport(s).
port‐string (Optional)Displaysstopbitsforspecificconsoleport(s).