Switch Configuration Guide

set console flowcontrol Setting Console Port Properties
Enterasys Matrix DFE-Gold Series Configuration Guide 4-7
Defaults
Ifport‐stringisnotspecified,theflowcontrolsettingforallconsoleportswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaytheflowcontrolsettingforconsoleportcom.1.1:
Matrix(rw)->show console flowcontrol com.1.1
Port Flow
------------ --------
com.1.1 ctsrts
set console flowcontrol
Usethiscommandtosetthetypeofflowcontrolforoneormoreconsoleports.
Syntax
set console flowcontrol {none | ctsrts | dsrdtr} [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,flowcontrolwillbesetforallconsoleports.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoenableDSR/DTRflowcontrolforconsoleportcom.1.1:
Matrix(rw)->set console flowcontrol dsrdtr com.1.1
clear console flowcontrol
Usethiscommandtoclearthetypeofflowcontrolforoneormoreconsoleports.
Syntax
clear console flowcontrol [port-string]
none Disablesallhardwareflowcontrol.
ctsrts EnablesCTS/RTS(Cle artoSend/RequesttoSend)hardwareflow
control.
dsrdtr EnablesDSR/DTR(Data SetReady/DataTerminalReady)hardware
flowcontrol.
port‐string (Optional)Setsflowcontrolforspecificconsoleport(s).