Owner manual

Built-in Commands

11-10 Network Tools Screens

soft_reset

Description: Restarts the software image, which restores the user configuration settings

from NVRAM. The user will be queried to confirm the reset command to

ensure against unwanted resets.

TIP: The Network Tools connection to the device will be terminated

upon execution of this command.

Syntax: soft_reset

Options: None

Example:

->soft_reset

RESET: Are you *SURE* ? -> Y

telnet

Description: Allows the user to communicate with another host (that supports Telnet

connections) using the Telnet protocol. The user must specify the remote host

using its IP address. The [IP address] field is mandatory. If no Port number is

specified, telnet will attempt to contact the host at the default port.

Syntax: telnet [IP address] <Port #>

Options: None

Example:

-> telnet 134.141.12.345

Trying 134.141.12.345

Connected to 134.141.12.345

SunOS UNIX (server 1)