Owner manual

Built-in Commands
Network Tools Screens 11-7
Example:
-> netstat -i
Interface + Description MTU Speed Admin Oper MAC Addr
#1 (ethernet - csmacd) 1514 10000000 up up 0x00 0x00 0x1d 0x07 0x50
0x0e
#2 (ethernet - csmacd) 1514 10000000 up up 0x00 0x00 0x1d 0x07 0x50
0x0f
#3 (ethernet - csmacd) 1514 10000000 up up 0x00 0x00 0x1d 0x07 0x50
0x10
#4 (ethernet - csmacd) 1514 10000000 up up 0x00 0x00 0x1d 0x07 0x50
0x11
-> netstat -r
Destination Next-hop Interface
# Default Route DirectConnection 1
# 134.141.0.0 DirectConnection 2
# 134.141.0.0 DirectConnection 3
ping
Description: Generates an outbound ping request to check the status (alive/not alive) of a
device at a specified IP address.
Syntax: ping [IP address]
Options: None
Example:
-> ping 122.144.40.10
122.144.40.10 is alive
netstat (Continued)