User Manual

XyLoc Solo Quick Start · Page 2
Installing the XyLoc Lock (Keyboard)-95,98,NT 4 ONLY
Female PS/2 Plug
1. Shut down your computer and turn off the power.
2. Unplug the keyboard cable from the PC and plug it into the red female PS/2 plug
on the XyLoc Lock cable.
3. Plug the red male PS/2 plug into the keyboard port of your computer.
Note: Ignore the gray male plug: it is not used with the Keyboard version.
4. Turn on your computer.
Male PS/2 Plug
Installing the XyLoc Lock (Serial)-95,98,NT 4 and 2000
Female PS/2 Plug
Male PS/2 Plug (Red)
Male PS/2 Plug (Gray)
1. Shut down your computer and turn off the power.
2. Unplug the keyboard cable from the PC and plug it into the red female PS/2
plug on the XyLoc Lock cable.
3. Plug the red male PS/2 plug into the keyboard port of your computer.
4. Plug the serial port plug into the gray male PS/2 plug on the XyLoc Lock cable.
5. Plug the serial port plug into an available and unused serial port on your
computer.
6. Turn on your computer.
Serial Plug (Gray)
Placement of the XyLoc Lock
XyLoc uses advanced wireless technology to make PC security more convenient for the user. The proper
placement of the XyLoc Lock will ensure that users get the best performance from XyLoc.
Ideal placement is with the face of the Key parallel to the LED on the front of the Lock. The best
performance of the system will be achieved by trying to maintain this positioning while you are seated at
your PC doing your work.
The primary factor in deciding where to place the XyLoc Lock is to determine where the user will wear
the XyLoc Key the majority of the time. The Key can be clipped to a shirt pocket or belt or worn on a
lanyard around the user’s neck.