Datasheet

1818
Main characteristics
-17 different sizes, 3 different
versions (SPCK, SPCP,
SABP)
-2 different materials:
polycarbonate and ABS
-captive and sealable cover
screws in glassfilled PA
-integrated cover gasket of
PUR, IP 66/67
-base with plain sides or
knock outs
-all dimensions follow 25 mm
moduls
-base in always 50 mm deep
-cover depths: 25, 50, 75 or
100 mm
-sealing holes in each cover
(d = 1 mm)
-base/cover = male/female
- slots for PCB in base corners
Explanation to
the type symbols
SPCK 181808 T
S = CUBO S
PC = polycarbonate
AB = ABS
K = pre-pressed knockouts
P = plain sides
18 = 175 mm height
18 = 175 mm width
08 = 75 mm depth
T = transparent cover
G = grey cover
Ensto CUBO S enclosures
IP 66/67
The CUBO S range is designed for
housing of electrical and pneuma-
tic equipment, and is also suitable
as terminal box in mechanically and
chemically exacting conditions.
CUBO S is available in two versions,
with pre-pressings for openings on
the sides or with plain sides for in-
dividual machining of holes. Spe-
cial features are slots for PCBs in
the base and sealability of all cover
screws. Raw materials are polycar-
bonate and ABS. Standard colour
is RAL 7035 grey, other colours on
request. The covers are grey or
transparent. Dimensions follow 25
mm module steps.
Degree of protection is IP 66/67.