Datasheet

1414
Temperature range
EPDM gasket -40 ˚C to 90 ˚C
Silicon gasket -55 ˚C to 140 ˚C
(unpainted up to 180 ˚C)
Colour grey
(similar to RAL 7001)
special paint jobs on request
Main characteristics
-impact resitant - 7 Nm in
accordance with EN 50014
-temperature resistant
-suitable for use in explosion
hazard areas, e. g. for (Ex) e
-captive screws for the lid
-high resistance to chemicals
The H-range enclosures are made
of cast aluminium. They are sturdy
and impact resistant and give an
excellent housing for apparatus in
demanding locations in various in-
dustrial sectors. Impact strength is
7 Nm. These high-class aluminium
enclosures meet the requirements
of the mechanical industry with re-
gard to resistance against solvents,
petrol and oil. Special features are
high heat resistance and heat con-
duction. Heat resistance is 140
o
C
with silicone gaskets, unpainted
even 180
o
C. Corrosion resistance,
for example against sea water, can
be achieved with special lacquering.
An efficient shielding against inter-
ference is essential for equipment
used in electrical and electronic in-
dustry. A conductive gasket is
available for the purpose. The en-
closures have plain sides in RL 7001
grey colour. With special approval
also for use in Ex-surroundings.
Degree of protection IP 65.
Ensto CUBO H aluminium enclosures
IP 65
Explanation to the
type symbols
HALP 060604 G
H = CUBO H
AL = aluminium
P = plain sides
06 = 64 mm height
06 = 58 mm width
04 = 36 mm depth
G = grey cover