Datasheet

1010
CUBO customizing
service
Ensto Control can supply enclosures
machined to your need, thus
saving your time and money. After
they have passed through the ma-
chining lines, you will receive your
enclosures ready for mounting and
assembled according to your
instructions.
Holes and machining
Electronic components, displays and
cabling needs a number of holes and
tooling in the enclosures.
The Ensto tooling service can supply
milled, drilled, threaded and coun-
tersunk machining after your draw-
ings. Large series can be made eco-
nomically with exchangeable mould
CUBO with wide variation
parts according to the customer’s
specifications.
Schielding
Occasionally the shielding of en-
closures must withstand high frequen-
ces, from 30 up to 400 Mhz. Suffi-
cient shielding is achieved by
coating the inner side of the enclosure
with a layer of metal coating. An en-
vironmentally safe, water soluble
metal dispersion has been used
succesfully in Ensto for several
years. A conductive gasket ac-
complishes the shielding effect.
Colour service
In addition to the grey standard col-
our and the transparent covers the-
re are other colour alternatives as
well. Dyed raw material is an ec-
onomical choice for large series.
Smaller quantities can be lacquered.
An air drying paint according to the
RAL colour chart gives an excellent
result on ABS enclosures. For PC
enclosures a twocomponent paint
is the best choice. Lacquering will
also give the enclosures increased
chemical resistance and mechan-
ical strength. A protective layer of
UV lacquer is recommended for
transparent covers in extreme bright
sunshine.
Printing
Logotypes, instructive texts and pic-
tures can be printed on the enclos-
ures. They get a stylish look and they
are easy to keep clean and tidy.