Developers guide

Layer Panel
When you cluck on a Layer But-
ton on an Instrument Screen,
the Layer Panel appears below
in place of the Effects Screen.
Layer Name
Place the Text bar over the Name, type in Name, Hit Enter, program will take
rst twelve characters and rename the Layer
Glide Mode
Cluck on Command arrow and you will see your list of choices. Cluck on the
appropriate one.
Glide Time, Legato Layer, Restrike Decay Time, and Delay Mod
Place the Text bar over the display box, type number, hit Enter
Pitch Table
Cluck on Command arrow and you will see your list of choices. Cluck on the
appropriate one. (Note: as of this time, Ensoniq has not implemented access
to this function. In future versions of this program, you’ll see more uses for
this.)
Layer Velocity Range Lo and Hi
Place the Text bar over the display box, type number, hit Enter.
KeyRange Fix
This is a fun one. Ensoniq samplers have an odd peculiarity of having key
ranges overlap within a layer (such as Wave A0-C8, Wave 2 A0-C4). There
is no pattern on which plays - it’s not really supposed to happen, but it does.
Anyway, clucking on this button makes separate unique ranges for all the
wavesamples. This is a special function of Ensoniq MIDI-Disk Tools for
Windows!
Wave List Box
This shows you all the Wavesamples within the noted Layer, and the Key
Ranges associated with them. Double-clucking on the selection will take you
to the WaveSample Screen.
Layer Link
(ASR only) This joins Layer 1 with Layer 2, Layer 3 with Layer 4, and so on -
depending on which layer you have selected.
Sequence Count-Off
Cluck on Command arrow and you will see your list of choices. Cluck on the
appropriate one.
Record Mode
Cluck on Command arrow and you will see your list of choices. Cluck on the
appropriate one.
Record Source
Cluck on Command arrow and you will see your list of choices. Cluck on the
appropriate one.
Track Mix
Place the Text bar over the display box, type number. The parameter will auto-
matically adjust for you, or you may press Enter to enact the change.
Track Pan
Place the Text bar over the display box, type number. The parameter will au-
tomatically adjust for you, or you may press Enter to enact the change. (Note:
for default to WaveSample, enter WS)
Track Out
Cluck on Command arrow and you will see your list of choices. Cluck on the
appropriate one.
Effect Control
Cluck check box to toggle between “On” and “Off”
MIDI In Controls
This set of buttons set the Multi-In MIDI channels, and the MIDI Status (Local,
Both, MIDI, or External) of each track.
MIDI Out Controls
This set of control determines the MIDI Output channel of each track, and the
Output Bus (Bus1, Bus2, Bus3, Aux1-3)..
Track Status Bar
Please note the Mute/Play/Solo track bar - this you will nd very helpful when
auditioning tracks. Cluck to toggle between M (Mute), P (Play, and S (Solo).
Again, like on the other pages, the display boxes where you enter text will ac-
cept only the acceptable range of values. It will also reject most other things,
such as symbols or letters, but if you put something really weird in there, it
might cause an error.
Page 12 Page 38
Layer Panel Sequence Paramter Editing