User`s guide

6—Editing Algorithms
ENSONIQ DP/Pro Reference Manual 31
Regen Delay 0.0ms 0.0ms 1265ms T
Regen LoCut Fc 100Hz 1Hz 20.000kHz H, L
Regen LoCut Gain +0.0dB -99.0dB +0.0dB
Regen HiCut Fc 10.000kHz 1Hz 20.000kHz H, L
Regen HiCut Gain +0.0dB -99.0dB +0.0dB
Output Tap Flanger Flanger DDL
B=parameter has bi-polar range G=maximum gain limited by Set Max Gain System/MIDI parameter
H=high-frequency limit determined by system sample rate M=parameter has supplemental metered display
L=lowest frequency limited by Set Min Freq System/MIDI parameter T=parameter can be synchronized to system clock or MIDI clocks
28 Phaser
EQ Trim
Lo
Shelf
Hi
Shelf
Right
Left
Output
Left
Right
Input
LFO
Hi
Shelf
Lo
Shelf
Hi
Shelf
Lo
Shelf
Cross-Regen
Lo
Shelf
Hi
Shelf
Dry
Dry
Mix
Mix
Phaser
Network
Phaser
Network
DDL
DDL
Regen
Regen
Description: A stereo phaser driven by a flexible stereo LFO (see Flanger for LFO description).
Features low and high shelving EQ, modulatable delays, and filtered regeneration and cross-
regeneration.
Notes: Add some regen, set a very short delay, then cut high and low regen shelves to get plucked-
string and drum-like effects (try the LFO Pulse shape with a touch of randomization). The algo can be
tapped after the phaser or after the regen delay (the latter setting allows the wet signal to be delayed
with respect to the dry).
I/O Characteristics: Stereo-in, stereo-out.
Parameter Name Ref Value Min Max Attributes
Notch Mix Full Dry Full Wet Full Wet B
EQ Trim +0.0dB -99.0dB +0.0dB
LoShelf Fc 100Hz 1Hz 20.000kHz H, L
LoShelf Gain +0.0dB -99.0dB +48.0dB G
HiShelf Fc 10.000kHz 1Hz 20.000kHz H, L
HiShelf Gain +0.0dB -99.0dB +48.0dB G
Depth 0.00% 0.00% 100%
Center 0.00Hz 0.00Hz 20.000kHz H, T
Stages 1 1 12
Delay Smoothing 0ms 0ms 100.0sec
(Phaser parameters con’t.)
Parameter Name Ref Value Min Max Attributes
LFO Rate 0.00Hz 0.00Hz 1.760kHz T
LFO Shape Sine Sine Full-Neg
LFO Pulse Width 50% 0% 100%
LFO S/H Ratio [500]:1 [1]:1 [1000]:1
LFO S/H Ratio 1 [500] 1 [1] 1 [1000]
LFO L/R Phase +0deg -180deg +180deg B