User`s guide
6—Editing Algorithms
ENSONIQ DP/Pro Reference Manual 13
H=high-frequency limit determined by system sample rate M=parameter has supplemental metered display
L=lowest frequency limited by Set Min Freq System/MIDI parameter T=parameter can be synchronized to system clock or MIDI clocks
14 Spatial Delays
Delay
L Taps
Cross Regen
LoHi
Hi Freq, Cut Lo Freq, Cut Regen
L/R Pans
L/R Routing
Output
Left
Right
Mix
Mix
L
R
L/R PhaseLFO
Delay
R Taps
Cross Regen
LoHi
Hi Freq, Cut Lo Freq, Cut Regen
L/R
Levels
Right
Left
Input
Rate,
Depth
Lo
Lo
Lo
Freq,
Depth
Hi
Freq,
Depth
EQ
Trim
Hi
Hi
Description: Eight modulatable delays (four left and four right), each with level and pan controls.
Features low and high shelving EQ and a master size param that allows simultaneous control of all
delay times.
Notes: Sweep the delays manually, for Doppler and flange effects, or use the built-in LFO. Then create
dense, spatial echo fields using filtered regeneration and cross-regeneration.
I/O Characteristics: Stereo-in, stereo-out.
Parameter Name Ref Value Min Max Attributes
Mix Full Dry Full Wet Full Wet B
EQ Trim +0.0dB -99.0dB +0.0dB
LoShelf Fc 100Hz 1Hz 20.000kHz H, L
LoShelf Gain +0.0dB -99.0dB +48.0dB G
HiShelf Fc 10.000kHz 1Hz 20.000kHz H, L
(Spatial Delay parameters con’t.)
(Spatial Delay parameters con’t.)
Parameter Name Ref Value Min Max Attributes
HiShelf Gain +0.0dB -99.0dB +48.0dB G
Size 0.000% 0.000% 100%
Mod Depth 0.000% 0.000% 100%
Mod Rate 0.00Hz 0.00Hz 3.520kHz T
Mod Phase +0deg -180deg +180deg B