User`s guide

6—Editing Algorithms
ENSONIQ DP/Pro Reference Manual 11
11 Stereo Synthesizer
Left
Depth
Left
Right
Output
Right
Stereo
Synthesizer
Density
Description: Takes a mono source and spreads it out across the stereo field. Retains any stereo
information that is already present in the source.
I/O Characteristics: Stereo-in, stereo-out
Parameter Name Ref Value Min Max Attributes
Depth 0% 0% 100%
Density 100% 1% 100%
B=parameter has bi-polar range G=maximum gain limited by Set Max Gain System/MIDI parameter
H=high-frequency limit determined by system sample rate M=parameter has supplemental metered display
L=lowest frequency limited by Set Min Freq System/MIDI parameter T=parameter can be synchronized to system clock or MIDI clocks
12 Stereo Re-Imager
Right
Left
Output
Left
Right
Input
Hi Mono Amt
Hi Stereo Amt
MS
Matrix
MS
Matrix
MS
Matrix
Hi Mono Amt
Hi Stereo Amt
MS
Matrix
Crossover
Crossover
Hi
Lo R
L
Lo R
LHi
Input
Level
Output
Level
Description: Allows precise manipulation of mono and stereo (middle and side) information in high
and low frequency bands. Can be used to widen a stereo image, steer the bass to mono, invert
channels, swap channels, and to apply creative repositioning to any stereo source.
Notes: The crossover is designed such that the sum of high and low bands exactly equals the original
source.
I/O Characteristics: Stereo-in, stereo-out
Parameter Name Ref Value Min Max Attributes
Input +0.0dB -99.0dB +48.0dB
Output +0.0dB -99.0dB +48.0dB
Xover Fc 500Hz 1Hz 20.000kHz H, L
Lo Mono Amt +0% -400% +400% B
Lo Stereo Amt +0% -400% +400% B
Hi Mono Amt +0% -400% +400% B
Hi Stereo Amt +0% -400% +400% B
B=parameter has bi-polar range G=maximum gain limited by Set Max Gain System/MIDI parameter
H=high-frequency limit determined by system sample rate M=parameter has supplemental metered display
L=lowest frequency limited by Set Min Freq System/MIDI parameter T=parameter can be synchronized to system clock or MIDI clocks