User`s guide

5—Selecting Algorithms and Variations
ENSONIQ DP/Pro Reference Manual 3
The Selection of Algorithms and Variations
Algorithms and variations are selected by:
• pressing the AlgoA or AlgoB button.
Routing
Algo B Params B Mod B Bypass B
Algo A Params A Mod A Bypass A
Edit
• pressing the Previous Page button to select the top line of the algorithm-selection display if it’s
not already selected.
• turning the Value knob to select the desired algorithm.
• waiting a moment for the DP/Pro to install the algorithm you’ve selected.
• pressing the Next Page button to select the lower line of the algorithm-selection display.
• turning the Value knob to select the desired variation.
• waiting a moment for the DP/Pro to install the variation you’ve selected.
Tip: The DP/Pro is shipped from the factory with automatic installation of algorithms and
variations enabled. If you’d prefer to install algorithms and variations (and all their associated
parameters) manually—by pressing the Enter button after you’ve selected the desired
algorithm or variation—you can reset the System/MIDI AutoLoad parameter (see Chapter 2).
Tip: You can press the Compare button to listen to the last-saved version of the effect you’re
editing. Press it again to return to your edits.
Tip: When the AutoLoad feature is disabled and you’ve selected a new algorithm or variation
but haven’t pressed Enter to install it, you can press the Cancel button to return the DP/Pro’s
display to the currently installed algorithm and variation.