User`s guide

3—Selecting and Finding Effects
ENSONIQ DP/Pro Reference Manual 5
• press the Find Effect button again to execute the search.
The Find Effect button’s LED will flash to remind you to execute the search.
The Results of a Find
One of two things can occur when you attempt to find effects using Effect Finder: either you’ll find an
effect—or effects—that match your criteria, or you won’t.
If Effect Finder locates any effects, the lowest-numbered effect will be displayed. You can turn the
Value knob to browse through the found effects. Once you’ve found the effect you seek, you can
install it by press the Enter button.
The list of found effects will be available until you:
• press the Select Effect button, at which point the entire list of the DP/Pro’s effects will be
presented.
• press the Find Effect button, which will initiate a new Find process.
If Effect Finder finds no effects matching your criteria, the display will show:
No Match Found
You can perform as many Find procedures as you wish. Consider adjusting your criteria, or
broadening the search by setting one or more of the criteria to “All.”