User`s guide

3—Selecting and Finding Effects
ENSONIQ DP/Pro Reference Manual 1
3—Selecting and Finding Effects
Se le c t ing Ef f e c t s
The DP/Pro effects are stored in four banks, numbered as Banks 0, 1, 2 and 3. Banks 0 and 1 each
contain 128 RAM memory locations—numbered from 0 through 127—in which you can store the
effects you’ve created or edited. The upper two banks contain ROM effects pre-programmed by
ENSONIQ.
Note: The effect bank and memory locations are numbered as they are to correspond to the
MIDI Bank Select and Program Change values with which they can be selected. See “Selecting
Effects Via MIDI” below.
The effects in the DP/Pro are arranged sequentially in a single list that you can browse at any time.
Tip: You can repeatedly press the Select button to jump from the first effect in each bank to the
first effect in the next bank.
The Effect-Selection Displays
When the Select Effect button has been pressed, the DP/Pro’s main display shows the routing used by
the currently selected effect, and its name.
The signal routing used by the effect is shown on the top line
m
Type=Stereo: Serial
Name=DepTh oF SpaCe
i
The name of the effect appears on the bottom line
The DP/Pro’s auxiliary display shows the bank in which the currently selected effect resides, and the
three-digit number of its memory location it occupies within the bank.
The currently selected bank’s number
m
2000
i
The number of the effect’s memory location within the bank