User`s guide

2—System/MIDI Parameters
ENSONIQ DP/Pro Reference Manual 21
k
Mono Input Src=Off Global Wet
Mix=100% Wet
Values: Off; L-Input; R-Input
Default: Off
What this Parameter Does:
The Mono Input Src parameter allows you to route only the audio present at either the left or right
input into the DP/Pro’s ESPs.
Se t t ing t he Global We t /D r y Mix
Many of the DP/Pro’s algorithms contain a wet/dry mix parameter to provide control of the
interaction between dry signal and the audio processing provided by the algorithm. In addition, each
ESP offers an additional wet/dry mix—located among its Mixer Params—to help achieve a balance
between the result of the ESP’s processing and the original uneffected signal. Finally, the DP/Pro
allows you set an overall global balance between the original dry signal received at the DP/Pro’s
inputs and the mix produced by the outputs of its ESPs.
System/MIDI Parameter 73: Global Wet Mix
k
Mono Input Src=Off Global Wet
Mix=100% Wet
Values: Full Dry through 100% Wet
Default: 100% Wet
What this Parameter Does:
The Global Wet Mix parameter allows you to set a balance between the dry signal present at the
DP/Pro’s inputs and the audio produced at the outputs of its two ESPs.
P e r sonaliz ing EQ Low F r e que nc y and High Gain Lim it s
The DP/Pro allows you to establish low-frequency and maximum boost limits when editing
algorithms that contain EQ (equalization). Given the DP/Pro’s wide dynamic range, judicious
settings for this parameter can help prevent damage to your ears and/or equipment.
The algorithm parameter charts in Chapter 6 show which parameters are affected by these limits. If a
parameter has an “L” in its Attributes column, it’s affected by the Set Min Freq parameter. If it has a
“G,” it’s affected by the Set Max Gain parameter.