User`s guide

Front and Rear Panel Key
1. Input Level Knob—set analog input level to the DP/Pro. 22. Enter button—executes various DP/Pro operations.
2. Headroom LEDs—show analog input level to, or digital 23. Compare button—toggles between edited and last-saved
output level from, the DP/Pro version of currently selected effect.
3. Meter Function switch—sets behavior of Headroom LEDs. 24. Cancel button—undoes last operation.
4. Meter Function LED—shows current meter function. 25. Save button—intitiates process of saving effects to memory.
5. Sample Rate LEDs—show the DP/Pro current sample rate. 26. System/MIDI button—provides access to global parameters.
6. Auxiliary display—shows effect, algo and parameter numbers. 27. Power switch—turns the DP/Pro on and off.
7. MIDI In LED—lights to show incoming MIDI data. 28. AC Line jack—connects power cord to DP/Pro.
8. Digital In LED—lights to show presence of digital sync. 29. S/PDIF Input and Output jacks—connects DP/Pro to an S/PDIF
9. Main DP/Pro display digital device when a DI-Pro Digital I/O board is installed.
10. Value knob—is used to select effects, algos and adjust 30. AES/EBU Input and Output jacks—connects DP/Pro to an AES/EBU
parameters. digital device when a DI-Pro Digital I/O board is installed.
11. Tweak button—provides access to Tweak parameters and 31. MIDI In jack—receives MIDI data.
virtual Tweak knobs. 32. MIDI Out jack—transmits MIDI data from the DP/Pro.
12. Select Effect button—accesses the list of effects currently in 33. MIDI Thru jack—passes received MIDI data out from the DP/Pro.
the DP/Pro’s internal memory; repeated presses moves 34. Foot SW 1 & 2 jack—connects a dual foot switch to the DP/Pro.
between effect banks. 35. Left XLR Analog Output jack—sends analog audio from the DP/Pro’s
13. Find Effect button—accesses Effect Finder. left stereo bus.
14. Tap button—can be tapped to set the DP/Pro’s system tempo 36. Left 1/4” Analog Output jack—sends analog audio from the DP/Pro’s
for synchronized effects. left stereo bus.
15. Previous Page button—scrolls the DP/Pro’s display back 37. Right XLR Analog Output jack—sends analog audio from the
through parameters and moves cursor during some DP/Pro’s right stereo bus.
operations. 38. Right 1/4” Analog Output jack—sends analog audio from the
16. Next Page button—scrolls the DP/Pro’s display forward DP/Pro’s right stereo bus.
through successive parameters and moves cursor during some 40. Combination 1/4” and XLR Left Input jack—receives analog audio
operations. to be sent into the DP/Pro’s left stereo bus.
17. Routing button—provides access to signal-flow settings, and 41. Combination 1/4” and XLR Right Input jack—receives analog audio
to copy/swap functions. to be sent into the DP/Pro’s right stereo bus.
18. Algo A and Algo B buttons—intitiates selection of algorithms
and/or algorithm variations for ESP-A and ESP-B.
19. Params A and Params B buttons—provides access to mixing,
algorithm and Tweak parameter settings for ESP-A and ESP-B.
20. Mod A and Mod B buttons—provides access to real-time
modulation parameters for ESP-A and ESP-B.
21. Bypass A and Bypass B buttons—bypasses ESP-A and/or ESP-B.