User`s guide

2—System/MIDI Parameters
20 ENSONIQ DP/Pro Reference Manual
k
AutoLoad=Algos Meter
Range=18 dB
Values: Off—Effects and algorithms must be installed after selection by pressing the Enter button.
Algos—Algorithms and algorithm variations will be automatically installed upon selection.
Effects—Effects will be automatically installed upon selection.
Algos & Effects—Effect, algorithms and algorithm variations will be automatically installed upon
selection.
Default: Algos
What this Parameter Does:
The AutoLoad parameter determines whether or not effects and/or algorithms and their variations
will be automatically installed by the DP/Pro upon selection.
Tip: You may find it easier to shop for effect, algorithms and variations with this parameter
turned off, so that the DP/Pro will not perform an installation each time you pause during the
selection process.
Se t t ing Gain- R e duc t ion Me t e r ing
The DP/Pro’s algorithms that pertain to dynamics, such as its compressors and limiters, incorporate
gain-reduction. The displays that show the current amount of gain reduction can be scaled to depict
various dB ranges, providing a coarser or finer view of gain reduction.
System/MIDI Parameter 71: Meter Range
k
AutoLoad=Algos Meter
Range=18 dB
Values: 3 dB through 48 dB, in 3dB steps
Default: 18 dB
What this Parameter Does:
The Meter Range parameter determines the scale of gain-reduction displays presented in the DP/Pro’s
dynamics-related algorithms.
P r oc e ssing a Single M ono Audio Signal
The DP/Pro’s routing structures anticipate that you’ll be sending audio into both of the DP/Pro’s left
and right inputs, whether that audio is a single stereo image or two separate mono feeds. However, if
you’d prefer to use only a single input, the DP/Pro allows you to select the one you’d like to use,
switching the unused input off.
System/MIDI Parameter 72: Mono Input Src