User`s guide

2—System/MIDI Parameters
ENSONIQ DP/Pro Reference Manual 11
System/MIDI Parameter 26: Item
Finder App Group =1 Item=1 >
Effect=None
i
Values: 1 through 10
Default: 1
What this Parameter Does:
The Item parameter selects one of the 10 items—you can think of this as a slot—available in the
selected App group.
System/MIDI Parameter 27: (App Group) Effect
Finder App Group =1 Item=1 >
Effect=None
i
Values: None; 0000* through 3005
Default: None
What this Parameter Does:
The Effect parameter allows you to assign one of the DP/Pro’s effects to the currently selected item.
Each effect is shown as a four-digit number. The first digit represents the bank in which the effect is
stored. The three remaining digits show the program number of each effect within the selected bank.
If System/MIDI parameter 76 is set to “Yes,” an asterisk following the effect’s bank and program
numbers shows that the memory location is currently empty. ” If parameter 76 is set to “No,” unused
locations will not be available for selection by this parameter.
Gr ouping Ef fe c t s for Easy Se le c t ion
The DP/Pro allows you to group effects together as songs—a DP/Pro song is a list of effects meant to
be selected one after the other. A song can use any of the effects in the DP/Pro, arranged in any order.
There can be up to 10 steps in each song—each step being associated with a single effect—and up to 10
songs in the DP/Pro’s memory at any given time. You can move forward or back through the list by
pressing the pedals on a dual foot switch—such as an ENSONIQ SW-10 (see the System/MIDI L Ftsw
Cntlr and R Ftsw Cntlr parameters below).