User`s guide

2—System/MIDI Parameters
10 ENSONIQ DP/Pro Reference Manual
The Tap Average parameter determines the number of Tap button strikes the DP/Pro will average in
order to calculate the timing of the system tempo. You can also set the note value of each tap—see
System/MIDI parameter 20, Tapped Note.
System/MIDI Parameter 24: TapLED
Tapped Note=1/4 Note Tap
Average=2 TapLED=On
i
Values: Off; On
Default: On
What this Parameter Does:
The TapLED parameter turns on or off the LED in the DP/Pro’s Tap button. The Tap LED flashes at
the current system tempo when this parameter is set to “On.”
C r e at ing Y our Ow n A pp Cat e gor y f or Ef f e c t F inde r
The DP/Pro’s Effect Finder can search for effects according to the manner in which they’re used.
These possible uses are presented as the various App—for “Application”—categories in Effect Finder
(for more on using Effect Finder, see Chapter 3). You can also create up to 10 of your own usage
categories for situations not covered by those already written into the DP/Pro’s software. Each can
contain up to 10 effects This will allow you to use Effect Finder to locate effects according to your
unique needs.
Each of the 10 user-defined categories can be selected from among the App values in Effect
Finder—they’re listed as Groups 1 to 10.
System/MIDI Parameter 25: Finder App Group
k
Finder App Group =1 Item=1 >
Effect=None
Values: 1 through 10
Default: 1
What this Parameter Does:
The Finder App Group parameter selects one of the 10 App groups. Once you’ve selected a group, you
can choose the effects you want to assign to the group by assigning an effect to each item number.