User`s guide

2—System/MIDI Parameters
ENSONIQ DP/Pro Reference Manual 9
What this Parameter Does:
The Tempo Source parameter determines the master timing reference source for the DP/Pro. The
DP/Pro uses its own internal clock when Tempo Source is set to “Internal.” The DP/Pro can also use
MIDI clocks received from an external source when this parameter is set to “MIDI Clock.”
System/MIDI Parameter 21: System Tempo
k
Tempo Source=Internal System
Tempo=120 BPM
Values: 40 BPM through 400 BPM
Default: 120 BPM
What this Parameter Does:
The System Tempo parameter sets the speed of the DP/Pro’s internal clock, shown in Beats Per
Minute (BPM). When the System/MIDI Tempo Source parameter (16) is set to “Internal,” the System
Tempo parameter provides control over the timing of any synchronized algorithm elements.
Tip: You can also set the tempo of the DP/Pro’s internal clock by tapping the desired tempo
on the DP/Pro’s Tap button.
System/MIDI Parameter 22: Tapped Note
k
Tapped Note=1/4 Note Tap
Average=2 TapLED=On
Values: 4 Beats Dotted 1/4 1/8 Note 1/16 Triplet
3 Beats 1/4 Note 1/8 Triplet Dotted 1/32
1/2 Note 1/4 Triplet Dotted 1/16 1/32 Note
1/2 Triplet Dotted 1/8 1/16 Note 1/32 Triplet
Default: 1/4 Note
What this Parameter Does:
The Tapped Note parameter determines the note value ascribed to each Tap button strike when the
DP/Pro calculates its system tempo from the Tap button.
System/MIDI Parameter 23: Tap Average
Tapped Note=1/4 Note Tap
Average=2 TapLED=On
i
Values: 2 through 8
Default: 2
What this Parameter Does: