User`s guide

2—System/MIDI Parameters
ENSONIQ DP/Pro Reference Manual 7
MIDI Pgm Changes=Direct
Map=000 > Effect=None
i
Values: 000 to 127
Default: 000
What this Parameter Does:
The Map parameter operates in conjunction with System/MIDI parameters 16 and 18. It selects a
Program Change value to be linked to the effect selected with parameter 18 whenever parameter 16 is
set to “Use Map.”
System/MIDI Parameter 18: (Map) Effect
MIDI Pgm Changes=Direct
Map=000 > Effect=None
i
Values: None; 0000* through 3005
Default: None
What this Parameter Does:
The Effect parameter operates in conjunction with System/MIDI parameters 16 and 17, described
above. Set the Effect parameter to the number of the effect you’d like selected when the DP/Pro
receives the Program Change value displayed in the Map field to its left. This feature is active only
when parameter 16 is set to “Use Map.”
Each effect is shown as a four-digit number. The first digit represents the bank in which the effect is
stored. The three remaining digits show the program number of each effect within the selected bank.
If System/MIDI parameter 76 is set to “Yes,” an asterisk following the effect’s bank and program
numbers shows that the memory location is currently empty. ” If parameter 76 is set to “No,” unused
locations will not be available for selection by this parameter.