User`s guide

2—System/MIDI Parameters
6 ENSONIQ DP/Pro Reference Manual
System/MIDI Parameter 14: Transmit Cntlr Msgs
k
Transmit Cntlr Msgs=No
Transmit PrgCh Msgs=No
Values: No; Yes
Default: No
What this Parameter Does:
The Transmit Cntlr Msgs parameter enables or disables the DP/Pro’s transmission of MIDI controller
data from either of its virtual Tweak knobs, bypass button or dual foot switch.
System/MIDI Parameter 15: Transmit PrgCh Msgs
k
Transmit Cntlr Msgs=No
Transmit PrgCh Msgs=No
Values: No; Yes
Default: No
What this Parameter Does:
The DP/Pro can transmit a corresponding Program Change and Bank Select message each time you
select an effect from the DP/Pro’s front panel. The Transmit PrgCh Msgs parameter enables or
disables this feature.
System/MIDI Parameter 16:MIDI Pgm Chngs
k
MIDI Pgm Changes=Direct
Map=000 > Effect=None
Values: Direct; Use Map
Default: Direct
What this Parameter Does:
The MIDI Pgm Chngs parameter determines the manner in which the DP/Pro will respond to
received Bank Select and Program Change messages. When the parameter is set to:
• “Direct,” each received Bank Select and Program Change message will select the like-numbered
bank and effect.
• “Use Map,” you can designate the effects to be selected by particular Program Change values.
This parameter functions in conjunction with System/MIDI parameters 17 and 18, described below.
System/MIDI Parameter 17: Map