User`s guide

Part # 9310020501 Model # MM-142

D P / P r o R e f e r e n c e M a n u a l :

Written, designed, and illustrated by: Robby Berman and Jonathan Coulton

Special Thanks: Ray Legnini and Bryan Pape

ENSONIQ® Corp

155 Great Valley Parkway

Box 3035

Malvern, PA 19355-0735

USA

World Wide Web—http://www.ensoniq.com

Printed in U.S.A.

Please record the following information:

Your Authorized ENSONIQ Dealer:___________________________ Phone:_______________

Your Dealer Sales Representative:_________________________________________________

Serial Number of Unit:___________________________ Date of Purchase:_________________

Your Authorized ENSONIQ Dealer is your primary source for service and support. The above information will be

helpful in communicating with your Authorized ENSONIQ Dealer, and provide necessary information should you

need to contact ENSONIQ Customer Service. If you have any questions concerning the use of this unit, please

contact your Authorized ENSONIQ Dealer first. For additional technical support, or to find the name of the nearest

Authorized ENSONIQ Repair Station, call ENSONIQ Customer Service at (610) 647-3930 Monday through Friday

9:30 AM to 12:15 PM and 1:15 PM to 6:30 PM Eastern Time. Between 1:15 PM and 5:00 PM we experience our

heaviest call load. During these times, there may be delays in answering your call.

This manual is copyrighted and all rights are reserved by ENSONIQ Corp. This document may not, in whole or in

part, be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine readable

form without prior written consent from ENSONIQ Corp. The DP/Pro software/firmware is copyrighted and all

rights are reserved by ENSONIQ Corp.

Although every effort has been made to ensure the accuracy of the text and illustrations in this manual, no

guarantee is made or implied in this regard.

IMPORTANT:

Note: This equipment has been designed and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

* Reorient or relocate the receiving antenna.

* Increase the separation between the equipment and receiver.

* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

* Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to the product not expressly approved by ENSONIQ could void the user’s FCC authority

to operate the equipment.

In order to fulfill warranty requirements, your DP/Pro should be serviced only by an Authorized ENSONIQ Repair

Station. The ENSONIQ serial number label must appear on the outside of the unit, or the ENSONIQ warranty is

void.

• ENSONIQ and DP/Pro are trademarks of ENSONIQ Corp.