User`s guide

12—Supplemental Information
ENSONIQ DP/Pro Reference Manual 9
Build a Box to Merge Two Mono Foot Switches into One Stereo Jack
The advantage of this modification is that it will allow you to make two mono foot switches function
as one stereo foot switch.
Right mono foot switchLeft mono foot switch
Stereo cable needed from here to
either Foot Switch jack
Sleeve
Tip
Mono Jack
Sleeve
Tip
Sleeve
Ring
Tip
Stereo Jack
Mono Jack
Required materials: soldering iron
solder
wire cutters
drill and drill bits
one plastic housing assembly (must be large enough to mount three jacks)
one stereo jack
two mono jacks
shielded wire
1/4” stereo-to-stereo cable
1. Drill three holes in the housing assembly and mount the stereo and mono jacks.
2. Solder a wire from the tip of the left mono jack to the ring of the stereo jack.
3. Solder a wire from the tip of the right mono jack to the tip of the stereo jack.
4. Solder a wire(s) connecting the sleeves of all three jacks.
5. Connect the mono foot switch(es) to the mono jacks.
6. Connect the stereo-to-stereo cable between the stereo jack and the Foot Switch jack.
7. You might want to mark the housing assembly to easily identify the jacks.