User`s guide

11—Saving Effects
ENSONIQ DP/Pro Reference Manual 3
The Effect Finder App Type Selector Display
When you’ve designated FX types for your effect and pressed the Enter button, the DP/Pro allows
you to assign Effect Finder App types to your effect:
The Yes (Y)/ No (n) toggle for each App type; the selected type is underlined
m
Finder: YYnYnYnYnYnYYYYn
App:*Demo ENTER=Done
i
As you select each type’s Y/n toggle, the App type it represents will appear here
This display offers a Yes/no toggle switch for each of the Effect Finder App types. Pressing the Next
or Previous Page buttons selects each toggle in turn—as each toggle is selected, its App type is shown
on the bottom line of the display. Turning the Value knob sets each toggle to its yes or no position.
The word ENTER is shown on the bottom line of the display to remind you to press the Enter button
when you’re finished designating App types for your effect.
Tip: An effect can be assigned to App Groups 1 through 10 using the System/MIDI Finder
App Group parameters.
To learn more about Effect Finder, and for a complete list of App types, see Chapter 3.
The “Check Old Effect?” Display
If you’ve selected an already occupied location for your effect, the “Check Old Effect?” display
appears when you press Enter after selecting your Effect Finder App types:
The bank and program number of the location you’ve selected
m
Check effect 0000 first?
ENTER=Yes NEXT=No(Skip)
i
The lower line of the display presents your options
This display offers two choices:
If you’d like to audition the effect you’re about to replace, you can press the Enter button and
send some audio into your DP/Pro to hear the old effect stored in the selected memory location.
If you don’t need to audition the effect your replacing, you can press the Next Page button to
proceed to the final saving page.