User`s guide

11—Saving Effects
2 ENSONIQ DP/Pro Reference Manual
The Saving D isplays
The Location Selection Display
When you press the Save button, the first of the DP/Pro’s Save pages appears:
The selected location’s bank number The memory location within the selected bank
l n
Save into location 0:001
Name:Undefined 0:0
i
If there’s an effect already stored in the selected location, its name will appear here
The Effect-Naming Display
When you’ve selected a location and pressed the Enter button, the effect naming page appears:
Save new effect as:
Name=_DepTh oF SpaCe
i
The underlined character is selected for editing
When this page is visible, you can press the Next or Previous Page buttons to select each position in
the effect’s name, and then turn the Value knob to select the desired character.
The Effect Finder FX Type Selector Display
When you’ve named your effect and pressed the Enter button, the DP/Pro allows you to designate
Effect Finder FX types for your effect:
The Yes (Y)/ No (n) toggle for each FX type; the selected type is underlined
m
Finder Type: YnYnnnnnnnn
FX:Reverb ENTER=Done
i
As you select each type’s Y/n toggle, the FX type it represents will appear here
This display offers a Yes/no toggle switch for each of the Effect Finder FX types. Pressing the Next or
Previous Page buttons selects each toggle in turn—as each toggle is selected, its FX type is shown on
the bottom line of the display. Turning the Value knob sets each toggle to its yes or no position.
The word ENTER is shown on the bottom line of the display to remind you to press the Enter button
when you’re finished designating FX types for your effect.
To learn more about Effect Finder, and for a complete list of FX types, see Chapter 3.