User`s guide

11—Saving Effects
ENSONIQ DP/Pro Reference Manual 1
11—Saving Effects
Whe r e Ef f e c t s ar e Save d
The DP/Pro provides two user banks for the storage of effects you’ve edited or created—banks 0 and
1. The procedure for saving an effect includes steps that allow you to assign Effect Finder attributes to
the effect.
Note: Effects you’ve edited or created are only temporary until you save them to the DP/Pro’s
memory.
Should you choose to save an effect to an already occupied location, the DP/Pro lets you audition the
effect currently stored there. This helps ensure that you don’t inadvertently replace effects that you
want to keep.
Saving an Ef f e c t t o the D P /P r o’ s Me m or y
Saving an effect is a multi-step process. The DP/Pro’s displays lead you through the procedure, step-
by-step (the displays are detailed below). An effect is saved by:
• pressing the Save button.
Routing
Algo B Params B Mod B Bypass B
Compare SaveEnter Cancel System
Algo A Params A Mod A Bypass A
MIDI
Edit
• turning the Value knob to select a location in Bank 0 or 1 in which to store the effect, and then
pressing Enter.
• using the Next and Previous Page buttons and the Value knob to name the effect being saved,
and then pressing Enter.
• using the Next and Previous Page buttons and the Value knob to assign one or more Effect Finder
FX types to the effect (see Chapter 3 to learn about Effect Finder), and then pressing Enter.
• using the Next and Previous Page buttons and the Value knob to assign one or more Effect Finder
App types to the effect (see Chapter 3), and then pressing Enter.
• optionally pressing Enter to audition any effect currently stored in the location you’ve chosen,
and then pressing Enter again to proceed, or the Previous Page button to select a new location.
• pressing Enter to complete the saving process.
Tip: You can cancel a saving operation at any time by pressing the Cancel button.