User`s guide

9—Tweak Parameters
2 ENSONIQ DP/Pro Reference Manual
• pressing the Params A or B button repeatedly until “Set Tweak Params” appears on the top line
of the DP/Pro’s main display.
Routing
Algo B Params B Mod B Bypass B
Algo A Params A Mod A Bypass A
Edit
• pressing the Next or Previous Page buttons to select an unused Tweak parameter slot.
• turning the Value knob to select the algorithm parameter you’d like to assign to the displayed
Tweak parameter slot.
Tip: You can double-click the Cancel button to quickly reset any Tweak parameter to its
starting-point setting.
A c c e ssing and Adj ust ing Tw e ak Par am e t e r s
The Tweak Display
The Tweak display displays the Tweak parameters for both of the currently installed effect’s ESPs, as
well as the DP/Pro’s virtual Tweak knobs (see Chapter 10). When a Tweak parameter is selected, the
top line of the Tweak display shows the selected Tweak parameter ‘s name, while the bottom line
shows the algorithm parameter designated as the Tweak param, and its current value:
The Tweak parameter being edited
m
Tweak Param A1 Size=85%
j p
The associated algorithm parameter The algorithm parameter’s current value
ESP-A’s Tweak parameters are “Param A1,” “Param A2,” and so on through “Param A8”; ESP-B’s are
“Param B1” through “Param B8.”
The number of each Tweak parameter is also shown in the DP/Pro’s auxiliary display:
The “P” stands for “parameter”
m
P 1
i
The number of the selected Tweak parameter
Tweaking a Tweak Parameter
An Tweak parameter’s value is edited by:
• pressing the Tweak button.