User`s guide

8—Mixing
ENSONIQ DP/Pro Reference Manual 3
Mixer Parameter 2: ANA Inp Balance
k
ESP-A: Mixer Params ANA Inp
Balance=Center
Values: Full <L through Full >R as percentages; Center
Default: Center
What this Parameter Does:
The ANA Inp Level parameter allows you to alter the stereo balance of analog audio being fed into
each ESP.
Mixer parameters 3 and 4 are available only when a DI-Pro digital I/O board has been installed in the
DP/Pro. See the DI-Pro User’s Guide for information on these parameters.
Setting the Amount of Signal Fed Back to ESP-A from ESP-B
When the Stereo: Feedback routing is selected, ESP-A offers a mixer parameter for controlling how
much of ESP-B’s output will be fed back into ESP-A’s input. The parameter values are deciBels of
change to a unity-gain feed from the output of ESP-B into ESP-A.
Mixer Parameter 5: B>A Inp Level
k
ESP-A: Mixer Params B>A Inp
Level=+0.00dB
Values: -99.0dB through +6.0dB
Default: +0.0dB
What this Parameter Does:
The B>A Inp Level parameter adjusts the amount of signal being fed back from ESP-B to ESP-A when
the Stereo: Feedback routing is selected.
Setting the Stereo Balance of Signal Fed Back to ESP-A from ESP-B
When the Stereo: Feedback routing is selected, ESP-A offers a mixer parameter for controlling the
stereo imaging of the audio being sent from ESP-B’s output back into ESP-A’s input. The amount of
panning shift is shown as a percentage of change to the original balance, with arrows showing the
direction of the shift.