User`s guide

7—Copying and Swapping Algorithms

ENSONIQ DP/Pro Reference Manual 1

7—Copying and Swapping Algorithms

U sing the Copy/Sw ap T ools

The DP/Pro provides a set of utilities that allow you to use your favorite algorithm edits again and

again, in different contexts. You can:

• swap algorithms and their settings between ESP-A and ESP-B.

• copy algorithms and their settings from ESP-A to ESP-B.

• copy algorithms and their settings from ESP-B to ESP-A.

• copy algorithms and their settings from either ESP in one effect to either ESP in another.

Each of these procedures is accomplished by performing a special procedure; in the case of moving an

algorithm and its setting between effects, two procedures are required.

The Copy/Swap Display

All of the DP/Pro’s copying and swapping procedures are accomplished from the same display,

which is accessed by pressing the Routing button:

Press ENTER to:

Swap Algo A and Algo B

This shows the procedure to be performed

Performing a Copy/Swap Procedure

The copying and swapping commands are accessed by:

• pressing the Routing button repeatedly until the phrase “Press ENTER to:” appears on the top

line of the DP/Pro’s main display.

Routing

Algo B Params B Mod B Bypass B

Compare SaveEnter Cancel System

Algo A Params A Mod A Bypass A

MIDI

Edit

• turning the Value knob to select the procedure you’d like to perform.

• pressing the Enter button to execute the procedure.

Tip: You can undo a copy/swap procedure by pressing the Cancel button.