User`s guide

6—Editing Algorithms
46 ENSONIQ DP/Pro Reference Manual
42 Signal Generator
Sine Level Sine In/Out
Frequency
RightLeft
Right
Left
Output
Input
Impulse Level Impulse In/Out
Rate
Noise Level Noise In/Out
Noise
Filter
Frequency,
Bandwidth
Noise
Generator
Thru Level
Thru Path In/Out
L/R
Balance
Sine
Generator
Impulse
Generator
Description: Sine, impulse, and noise generators. The noise can be full-bandwidth or colored (a
bandpass filter sets the center frequency and bandwidth).
Notes: Each generator can be switched clicklessly in or out.
I/O Characteristics: Generators are mono-out; thru path is stereo-in, stereo-out.
Parameter Name Ref Value Min Max Attributes Comments
Sine Gen Out Out In
Impulse Gen Out Out In
Noise Gen Out Out In
Thru Path Out Out In
Sine Freq 1.000kHz 1Hz 20.000kHz H
Sine Level +0.0dB -99.0dB +0.0dB
Impulse Rate 0.00Hz 0.00Hz 20.000kHz H
Impulse Level +0.0dB -99.0dB +0.0dB
Noise Filter 1.000kHz 1Hz 20.000kHz H,
Noise BW Full 0.00oct Full
Noise Level +0.0dB -99.0dB +0.0dB
Thru Level +0.0dB -99.0dB +0.0dB
L/R Balance Center Full <L Full >R
B=parameter has bi-polar range G=maximum gain limited by Set Max Gain System/MIDI parameter
H=high-frequency limit determined by system sample rate M=parameter has supplemental metered display
L=lowest frequency limited by Set Min Freq System/MIDI parameter T=parameter can be synchronized to system clock or MIDI clocks