Specifications

1 Sequencer and Audio Track Parameters 1
CMD AUDIO SAMPLE INFO
(Audio) TRICK f%iss (COMMAND): /(audio) (TRACK)/S~~O~~“US~~~ the Ca_t and Cb) ,butions ‘\ .
This command provides information about the last AudioSample that was being triggered when
the sequencer was last stopped (i.e., the same AudioSample that was last displayed on the
Edit/(audio) Track, ASMPLNAME screen).
Pressing (ENTER-YES) will invoke the command, revealing the following read-only screens:
STOP
r3.y
TAACK
RS17PL1”1R::E=FTSPIPL--UO2u”3
If the AudioSample has not been named, this defaults to “ASMPLGH4##’
(##### represents
the currently selected AudioSample file number).
TRACK
STOP
I
RSPlPL MUI:BER=#####
I
STOP
ii-
TRACK
RSI”)P: RESIZEMCY=RRR
This screen shows whether the AudioSample resides in RAM or SCSI.
STOP
TRACK
I
S I Z E =######## 8:KS
I
This display shows the size in blocks.
STOP
Yj.!.
TRdCK
SRI”IP:E RRTE=29.16 I9 KHZ
This display shows the sample rate (either 29.7619 or 44.1000). Pressing (ENTER-YES) from any
of the above screens will exit the command.
ENSONIQ ASR-10 Version 3 Operating System
83