Specifications

Sequencer and Audio Track Parameters

Press (ENTER-YES). The display shows:

STOP

10.

This command does not have any Audition.

11. Pressing (ENTER-YES) will execute the command. If a destination Track in a different

Sequence is selected as the target for the COPY, the PREPARING AUDIO TRACKS message

will be briefly displayed while the Audio Tracks are cued up for Playback.

CMD ERASE AUDIO TRACK

(Audio) TRACK p

ress

(COMMAND) /(audio) (TRACK)/ scroll using the

f?)

and @) buttons

This command will erase all Audio Trigger, Audio-Mix and Audio-Pan events from the currently

selected Audio Track.

STOP

7RACK

ERRSE

RUDlU

TRRCK

Pressing (ENTER-YES) will invoke the command, revealing the following screens:

STOP

~iz%Z

TRACK

RUDICI

TRRCK=R

AUDIO TRACK

Range: A or B (selected by pressing an (AUDIO TRACK) button)

A secondary parameter determines whether or not the command will erase all the RAM and Disk

AudioSamples that are triggered by the Audio Trigger events on the Audio Track being erased,

or if only the Audio Trigger, Audio-Mix and Audio-Pan events will be erased, leaving the

AudioSamples

intact:

STOP

$--

TRACK

ERRSE=EVEMTS

RSRPLS

ERASE

Range: EVENTS + ASMPLS, ATRK EVENTS ONLY

Pressing (ENTER-YES) will execute the command. This command has no Audition.

ENSONIQ

AS&l

0 Version 3 Operating System