Specifications

Sequencer and Audio Track Parameters
1. Pressing (ENTER-YES) from the above screen will display the following screen:
l,-WD SE0_.
ERRSE FROP1 =RRr-I
STOP
2 Use the Data Entry Controls to select RAM, SCSI, or BOTH.
3. Press (ENTER-YES). The display shows the following confirmation screen:
4. Pressing (ENTER-YES] will execute the command.
Pressing (CANCEL-NO) will abort the command.
CMD SET SONG ATRK PLAYBACK
SECPSONG Press (COMMAND) / (SEWSONG) / scroll using the @J and @J buttons
This command determines which pair of Audio Tracks (Song or Sequence) will be played when
the song is selected. It also enables or disables Song Audio Track recording.
STOP
I
l Press (ENTER-YES). The display shows:
STOP
P:RY=SEu” RTRKS OMLY
PLAY Range: SEQ ATRKS ONLY, SONG-A + SEQ-B,
SEQ-A + SONG-B, SONG ATRKS ONLY
Pressing (ENTER-YES) will execute the command. If any Audio Tracks have been recorded, the
PREPARING AUDIO TRACKS message will be briefly displayed while the Audio Tracks are
cued up for playback. This parameter defaults to PLAY=SEQ ATRKS ONLY upon booting.
l If the SONG is not selected when the SET SONG ATRK PLAYBACK command is invoked,
the song will be automatically selected.
l If the song is selected, and this is set to PLAY=SEQ ATRKS ONLY, trying to enter record on
an Audio Track results in the NOT SET FOR SONG ATRK message.
74
ENSONIQ ASR-10 Version 3 Operating System