Specifications
Sequencer and Audio Track Parameters
New Sequencer Parameters
EDIT
SONG ATRK REC
SE&SONG
Press (EDIT)/
(SEQ.SONG)
I scroll using the (a) and
m
buttons
r
STOP
SE0
.7-y
SOMG
RTRK
REt=RUCIO
SONG ATRK REC
Range:
AUDIO,
MIX+PAN
This parameter determines what will be recorded onto Song Audio Tracks when the Song is
selected, and you enter Record with an Audio Track selected:
AUDIO
-
the sequencer will record Audio Trigger Events in REPLACE mode. AudioSample
data is recorded according to the punch-in rules, described earlier. This is the default value for
this parameter.
MIX+PAN
-
the sequencer will record AUDIO-h4IX and AUDIO-PAN events in ADD mode.
EDIT
SEGWONG
MUTE ATRKS IN REC
Press (EDIT) /
(SE@SONG)
/ scroll using the
m
and
(p)
buttons
STOP
r)UJE
RTRKS
li’i
REC=YES
MUTE ATRKS IN REC
Range: NO, YES
Determines whether or not Audio Track playback will be muted during Audio Track recording:
YES
-
Audio Track playback will be muted during Audio Track recording. This is the default
value.
NO
-
Audio Track playback will not be muted during Audio Track recording.
Note:
In combination with setting the Sample*Source Select, REC SRC=MAIN-OUT,
setting the Edit/Seq*Song,
IvIUTE
ATRKS IN REC=NO, enables Audio Track Bounce-
Down. See earlier in this document for information on performing bounce-down.
CMD
SEQ.SONG
ERASE ALL AUDIOSAMPLES
Press (COMMAND)
/
(SEQ.SONG)
/ scroll using the
(T)
and
@II
buttons
This command will erase all AudioSamples within the current SONG
+
ALL SEQS (Project) file
from RAM, SCSI, or BOTH. This will not erase SCSI resident AudioSamples that are triggered by
other SONG + ALL SEQS (Project) files.
STOP
ERRSE
I?::
RL’DIU”SR1”IP:ES
ENSONIQ
AS&l
0 Version 3 Operating System
73