Specifications
Audio Track Recording
Principles of Audio Track Recording
Which Track is Selected?
The solidly selected (yellow LED lit) track is always the target for recording;
\I/
mc
IO
mm-or.3
tc
G3
CJ
II
00
1
2 3
4
5 6 7
8 A
B
Instruments
Audio Tracks
Sequence Tracks
I
If the Audio Track LED is solidly selected, and InstrumenPSequence
track LED is flashing selected, you will be recording an Audio Track.
I
In LOAD mode, it is possible to have both an Audio Track and an Instrument solidly selected. If
you were to enter record mode on the ASR-10, the name of track you see on the display is the one
you are recording on:
If an InstrumenPSequence Track name is shown
in the display, it is the target for recording:
If ATRK-A
LEFT
or ATRK-6 RIGHT is shown in
the display, it is the target for recording:
Tie the Jack to the Track
l If you are connected to the Audio Input A/Left jack (mono), you will be recording data to
Audio Track A. You will not be recording any AudioSample data to Audio Track B.
l If you are connected to the Audio Input B/Right jack (mono), you will be recording data to
Audio Track B. You will not be recording any AudioSample data to Audio Track A.
l If you are connected to both Audio Inputs (stereo), you will be recording two discrete
AudioSamples using Audio Track A and Audio Track
8.
Note:
This does not imply that what is plugged into the jacks will determine which
Audio Tracks will be selected for recording. Remember, your record source is selected
on the Sample*Source Select page.
54
ENSONIQ ASR-10 Version 3 Operating System