Specifications

Audio Track Recording

MAIN-OUT Signal Chain Routing

Audio Input(s)

and

Recorded Signal

b 1

are disabled

instrument*Sequence Tracks

CLICK

BUS1

BUS2

BUS3

mxer

AUXl

AUX2

-I+

AUX 0

3old lines suggest a stereo path

AUX3

-I

Main Out

uts

About the MAIN-OUT Signal Chain Routing (for Bounce-down)

The ASR-10 becomes a two-track re-mix studio with source-mix capabilities.

In this routing, the Audio Inputs and Digital I/O In are disabled. The Audio Track Source-

Monitor LEDs remain off at

all

times. Any ASR-generated audio signal that is routed to

BUS1/2/3

wiII

be recorded. The FX Processor

follows

the Mixer, so you

wiII

be recording the

output of the FX Processor. The output of the FX Processor is monitored out the Main Outs.

Tip:

When Sample*Source Select, REC SRC=MAIN-OUT, and Edit/Seq*Song,

CLICK=REC, the click wiII be muted to prevent it from being recorded. You can set it

to ON and route it to AUX1/2/3 if you want to hear it without recording it.

ENSONIQ ASR-10 Version 3 Operating System