Specifications

Audio Track Recording
INPUT+FX Signal Chain Routing
Instrument*Sequence Tracks
-CLICK
.OUT
BUS1
BUS2
l+
Digital I/O In
is disabled
BUS3 A
AUXl
AUX2
l+
I
Mixer
AUX3 4
Bold lines suavest a stereo path
Main Out
(DRY)
AUX Outs
About the lNPUT+FX Signal Chain Routing
In this routing, the FX Processor is moved between the Audio Input (Digital I/O In is disabled)
and the RAMTracks or DiskTracks. The -Tracks or DiskTracks record the direct output of
the FX Processor, and the Mixer monitors the output of the FX Processor (source). The h4ixer also
monitors the output of the RAMTracks or DiskTracks, and will playback dry (without additional
processing). The Audio Input is hard-wired directly to BLJSl. The FX Processor is not available
for processing Instrument6equence Tracks, the Click track, or RAMTrack or DiskTrack
playback. If the Edit/(audio) Track, OUT value is set to BUS1/2/3, the display will show
“OUT=DRY-FX BUS IN USE,” because the effects unit is not available on the “effects loop” from
the mixer. AUX1/2/3 are still available, as usual. The Edit/(seq) Track, OUT and Edit/Amp,
OUT parameters will also show “OUT=DRY-FX BUS IN USE” for any Tracks/WaveSamples
that are routed to BUS1/2/3.
50
ENSONIQ ASR-10 Version 3 Operating System