Specifications
Audio Track Recording
I
l If there is already a song file with the same name on the disk, the display will ask DELETE
OLD VERSION? Press (ENTER-YES] to save the song, replacing the one on the disk. This is
for updating songs to which you have made changes. Or press (CANCEL-NO) to abort the
procedure.
l If there is not enough free space on the disk, the display will show:
STOP
i@J3 SE0
SONG
IMSERJ
GI’SK-HIT EMTER
At this point, press the Eject button on the disk drive, remove the disk, insert the next ASR-10
formatted disk into the drive, and press (ENTER-YES). You may need to repeat this step
several times, depending on the size and amount of the RAMTracks.
9.
When the SONG + ALL SEQS file is finished being saved, the display will show
COMMAND COMPLETED, then return to the SAVE SONG + ALL SEQS command page.
About Saving the Bank
Use the SAVE BANK command to save the current Bank. Banks provide a way to load a whole
group of Instruments, song and sequences, and Audio Track recording data into the ASR-10 with
a few button presses. When you save a Bank to disk, it is like taking a “snapshot” of the contents
of the
ASR-10
internal memory. The Bank file stores the following information:
l Which Instrument files are loaded into each Instrument*Sequence Track location.
l Which SONG + ALL SEQS file is loaded into the internal memory. This includes
all
Audio
Track recording data, and automatically prepares any Audio Tracks (Song or Sequence
Audio Tracks) that would be played by the song.
l Up to eight discrete Performance Presets.
l The Bank Effect and its parameter settings.
l The Edit/(seq) Track MIX, PAN, OUT, and EFFECT MOD CONTROL setting for each
Lnstrument*Sequence Track.
Saving the Bank:
1.
Insert one of your own ASR-10 formatted disks (you should not save any of your own files to
the Version 3 O.S. disk.)
2 Press
(w),
then (INSTRUMENT) , and use the Data Entry Controls to select the SAVE
BANK command.
3.
Press (ENTER-YES). The display shows:
INST STOP
#LX?
SONG
BRMK
RRPlE=BJRK
JUT
BMK
The display shows the current Bank name with a cursor (underline) beneath the first
character. If you want to rename the Bank, use the Data Entry Controls.
If you are updating an existing bank, and you didn’t rename the bank, pressing (ENTER-YES]
will show the following screen:
STOP
ENSONIQ ASR-10 Version 3 Operating System
37