Specifications

DAT Backup/Restore
1
7. Press (ENTER-YES]. If more than one DAT tape is required, the display will show:
SYSTEM STOP
USE I7:‘LJIP:E DRJ?
Press (ENTER-YES] if you’re prepared. If not, press (CANCEL-NO) .
8. The display shows:
SYSTEM STOP
DlSCOMMECJ ULIJS+PHOMES
Caution!Caution!
Disconnect the Main Out jacks and the Headphone output. TheDisconnect the Main Out jacks and the Headphone output. The
BACKUP coBACKUP command function bypasses the main Vol$me ‘Slider.mmand function bypasses the main Vol$me ‘Slider. TheThe
dafa bursts occurring during BACKLJP are very loud and could damagedafa bursts occurring during BACKLJP are very loud and could damage
loudspeakers, headphones or, human hearing!loudspeakers, headphones or, human hearing!
9. Press (ENTER-YES). The display shows:
SYSTEM STOP
SJRRJ RECGRC-EMJER
Put your DAT machine into Record.
10. Press (ENTER-YES). This display dynamically updates as each packet is backed up:
SYSTEM
II F$,“’
BRCKUP----OF----
STOP
(If only one tape is required, skip to step 14.)
11. If more than one DAT tape is required, the display will show:
SYSTEM STOP
lMSERJ CRT i’-EI”IJER
when the first tape is full. After removing the first tape and labeling it, insert another tape
into the DAT machine.
26
ENSONIQ ASR-10 Version 3 Operating System