Specifications

DAT Backup/Restore

Select the DAT BACKUP Command

Go Ahead

The BACKUP function transfers packets of information from the SCSI Storage Device and backs

them up as an image backup to DAT tape. As a continuation of the BACKUP function, the

ASR-10 will verify the backup.

Note:

If you press (CANCEL-NO] in response to any prompt, the command will be

aborted (unless specified).

Press (COMMAND), then (SYSTEM-MIDI).

2 Press the (a) button until the display shows:

SYSTEM

yi’.

.-A,_

CRT BRCKUPIRESTORE

STOP

It is located between CONFIGURE AUDIO TRACKS and BACKUP RESTORE.

Press the (ENTER-YES) button. The display shows:

SYSTEM STOP

(‘?L’ST

ERRSE

17EflORY

3K?

Press (

ENTER~YES)

and the display shows:

SYSTEM STOP

If not, press the

until it does.

Press (ENTER-YES]. The display shows:

SYSTEM

STOP

SCSl

CRIL’E=O

Use the

to select the same number as the Priority/ID Number on your SCSI storage device.

Press (ENTER- Y ES). The display shows:

SYSTEM STOP

Rewind the tape on your DAT machine.

ENSONIQ ASR-10 Version 3 Operating System