Specifications

System*MIDl Parameters

What if the WaveSample you want to edit is not in Layer 1 (or in the currently displayed layer)?

By continually moving the cursor back and forth between the Layer and WaveSample values on

the

10.

Edit Context page-(selecting each defined layer), pressing

@~JTER-YES)

will heip you locate

WaveSample that you want to edit.

Press (SYSTEM-MIDI) to go back to the ENTER PLAYS KEY parameter.

Press

until the display shows ENTER PLAYS

KEY=E6.

Press (ENTER-YES). YOU

wiLl

hear the hand clap assigned to E6.

Press the (EDIT button to get to the Edit Context page.

Press (ENTER-YES) to update the Edit Context page. You will hear the hand clap assigned to

E6, but since this WaveSample is not on Layer 1, the display shows WS=ALL.

Move the cursor under the Layer value, and select Layer 2 using the

button.

Move the cursor under the WaveSample value, and press the (ENTER-YES) button. You have

just determined that this WaveSample is not on Layer 2, because the display still shows

WS=ALL.

Repeat the last to steps for Layer 3, Layer 4 and Layer 5. Haven’t found it yet, huh?

Move the cursor under the Layer value, and select Layer 6 using the

button.

Move the cursor under the WaveSample value, and press CENTER-YES]. The WaveSample

value has been updated, and the display shows

WS=37.

You’ve just used (ENTER-YES) to

find the location of the hand clap

(LYR=6

WS=37).

Now press (ENTER-YES) repeatedly, and

give yourself a hand!

ENSONIQ ASR-10 Version 3 Operating System