Specifications

Instrument, Bank & Preset Parameters
How To Import Roland Samples
When DEVICE TYRE=ROLAND, pressing CENTER-YES) will display the following page:
INST STOP
,<-agp
LORD DEVItE=XXXXXX
LOAD DEVICE Range: SCSI 0 to 7
This parameter selects the ID number for the Roland format SCSI Storage Device.
After selecting the Load Device, pressing (ENTER-YES) will perform the following functions:
1. The ASR-10 will check to see if SCSI is installed, and if the selected Load Device exists. If
SCSI is not installed, or if the selected Load Device does not exist, an error message will be
displayed, and the command will be aborted.
2 The ASR-10 will check to see if the selected Load Device is a valid Roland format SCSI
Storage Device. If the selected Load Device is invalid/unformatted, an error message will be
displayed, and the command will be aborted.
3. The ASR-10 will check to see if there is enough free memory to load the directory from the
selected Roland format SCSI Storage Device. There must be a minimum of 300 free blocks
available in memory (required for transferring data). If there is not enough free memory to
load the directory, an error message will be displayed, and the command will be aborted.
4. If SCSI is installed, and the selected SCSI Storage Device exists and is valid, the ASR-10 will
mount the selected Load Device. (The original current Storage Device will be restored when
the command is exited, if it exists and is a valid ASR-10 Storage Device; if it is no longer
valid, the current Storage Device will be reset to FLOPPY when the command is exited.) The
following page will be displayed:
PATCH Range: cl 6 character Patch names>
This parameter selects from among the Roland sampled sound Patches available on the selected
Load Device. Lower case letters will be converted to upper case. Any characters in the Roland
Patch name that are not available in the ASR-10 character set will be displayed as a blank space,
with the following exceptions:
Pressing (CANCEL-NO) from this page will re-display the VOLUME parameter page (if
implemented).
10
ENSONIQ ASR-10 Version 3 Operating System