Specifications

Instrument, Bank & Preset Parameters
After selecting the desired Volume, pressing (ENTER-YES) wilI display the following page:
,,,-,,,,,,,,,,,,,,,I
PROG
Range: cl 6 character Program names>
This parameter selects from among the Akai sampled sound programs available in the selected
Partition and Volume on the selected Load Device. Any characters in the Akai Program name
that are not available in the ASR-10 character set will be displayed as a blank space, with the
following exceptions:
This: Becomes this:
# +
Pressing (CANCEL-NO) from this page wiII re-display the VOLUME parameter page. After
selecting the desired Akai Program, pressing (ENTER-YES) will display the following page:
STOP
RANGE LO HI Ranges: A0 to C8
These parameters allow you to define a key range for the selected Akai program that you are
about to load. This can be used for doing partial imports when the selected program would
require more memory or layers than the ASR-10 supports. This parameter defaults to the full 88
note keyboard (A0 to CS).
Pressing (CANCEL-NO) from this page will abort the command. After selecting the desired range,
pressing (ENTER-YES) will display the following page:
INST STOP
t?gc
IMST=# -HIT EI’ITER
INST= Range: 1 to8
This parameter selects the target location into which the Akai Program will be imported. It
defaults to the lowest numbered unused (empty) Instrument*Sequence Track. Pressing any
unused (empty) (INSTRUMENT-SEQUENCE TRACK) button will update the INST=# display.
ENSONIQ ASR-10 Version 3 Operating System
7