Specifications

BrightEye 26
59
www.ensembledesigns.com tel [phone]
Specications
Analog Video Input
Number One
Type NTSC, PAL Composite
Impedance 75 Ω
Return Loss >40 dB, DC to 5.5Mhz
Input DC +/-1 volt DC
Input Hum <100 mV
Reference Input
Number One
Type 1 V P-P Composite Video, PAL or NTSC
Impedance 75 Ω
Return Loss >40 dB
Serial Digital Output
Number One
Type 270 Mb/s SD Serial Digital
(SMPTE 259M)
Impedance 75 Ω
Return Loss >15 dB
Output DC None (AC coupled)
Optical Output
Number One
Type SD
(SMPTE 297M, optical equivalent
of 259M)
Wavelength 1310 nm (1550 by special order)
Power –7 dBm
Maximum length 20 km
Fiber Type Single Mode
Multi-mode compatible with
8 dB attenuation at transmit end
Connector SC
Analog Video to SDI Performance
Bit Resolution 12 bit input quantization,
4 x oversampling
Decoding Adaptive Comb Filter,
3 or 5 line selectable
Signal to Noise >62 dB, weighted
Frequency Response ±0.1 dB, 0 to 5.5 MHz
Analog Audio Inputs
Number Four
Type Balanced
Impedance >15K Ω
Max Input Level 24 dBu
CMRR >60 dB, 20 Hz to 10 KHz
Quantization 24 bits, 128 x oversampled
Sample Rate 48 KHz
Reference Level -10 dBu to +4 dBu
Frequency Response ±0.1 dB, 20 Hz to 20 KHz
Crosstalk <106 dB
Dynamic Range >106 dB
General Specications
Size 5.625” W x 0.8” H x 5.5” D
(143 mm x 20 mm x 140 mm)
including connectors
Power 12 volts, 5 watts
(100-230 VAC modular power
supply not included)
Temperature Range 0 to 40° C ambient
Relative Humidity 0 to 95° non-condensing
SD SDI Out
Optical Out
Cpst In
Serializer
Embedder
Proc
Amp
TBC/
Frame Sync
12 bit
A to D
Converter
and
Decoder
Reference In
4 Channel
A to D
4 Channel
Mixer/Shuffler
Analog Audio In