Specifications

BrightEye 11-HD
40
www.ensembledesigns.com tel [phone]
Specications
Serial Digital Input
Number One
Type HD Serial Digital 1.485 Gb/s
SMPTE 274M, 292M or 296M
or SD Serial Digital
270 Mb/s SMPTE 259M-C
Impedance 75 Ω
Return Loss >15 dB
Max Cable Length 100 meters for HD
300 meters for SD
(Belden 1694A)
Automatic Input Cable Equalization
HD Standards Supported:
1080i (SMPTE 274M -4,5,6) 50, 59.94 or 60 Hz
720p (SMPTE 296M -1,2,3) 50, 59.94 or 60 Hz
1080p (SMPTE 274M -9,10,11) 23.98, 24, 25 Hz
1080sF (RP211 -14,15,16) 23.98, 24, 25 Hz
Analog Output
HD input yields HD analog out,
SD input yields SD analog out
Number One component or
one composite and one Y/C
Type Beta/SMPTE, Y, Pr, Pb
RGB
NTSC, PAL Composite
NTSC, PAL S-Video
Return Loss >40 dB
Output DC None (AC coupled)
Serial Digital Output
Number One
Type Follows input
Impedance 75 Ω
Return Loss >15 dB
Max Cable Length 100 meters for HD
300 meters for SD
(Belden 1694A)
SDI to Analog Performance
Bit Resolution 12 bit output reconstruction
8 x oversampling
Signal to Noise >65 dB
Frequency Response ±0.1 dB, 0 to 5.5 MHz
K Factor <1%
ScH Phase Error <±2 degrees
Dierential Phase <1 degree
Dierential Gain <1%
General Specications
Size 5.625” W x 0.8” H x 5.5” D
(143 mm x 20 mm x 140 mm)
including connectors
Power 12 volts, 7 watts
(100-230 VAC modular power
supply not included)
Temperature Range 0 to 40° C ambient
Relative Humidity 0 to 95%, non-condensing
Reclocker
Deserializer
SDI Out
HD or SD SDI In
HD SDI In Yields HD Analog Out
SD SDI In Yields SD Analog Out
C, Pr, R Out
Cpst, Y, G Out
Y, Pb, B Out
12 bit
D to A
Converter
and
Video
Encoder