Specifications

BrightEye 10
35
www.ensembledesigns.com tel [phone]
Specications
Serial Digital Input
Number One
Signal Type 270 Mb/s SD Serial Digital
(SMPTE 259M)
Impedance 75 Ω
Return Loss >15 dB
Max Cable Length 300 meters
Automatic Input Cable Equalization
Optical Input
Number One
Type SD
(SMPTE 297M, optical equivalent
of 259M)
Wavelength 1310 nm
Receiver sensitivity –18 dBm
Maximum length 20 km
Fiber Type Single Mode
Multi-mode compatible with
8 dB attenuation at transmit end
Connector SC
Analog Output
Number One
Type Beta/SMPTE, Y, Pr, Pb
RGB
NTSC, PAL Composite
NTSC, PAL S-Video
Return Loss >40 dB
Output DC None (AC coupled)
Serial Digital Output
Number One
Type 270 Mb/s SD Serial Digital
(SMPTE 259M)
Impedance 75 Ω
Return Loss >15 dB
Output DC <50 mV
SDI to Analog Performance
Bit Resolution 12 bit output reconstruction
8 x oversampling
Signal to Noise >65 dB
Frequency Response ±0.1 dB, 0 to 5.5 MHz
K Factor <1%
ScH Phase Error <±2 degrees
Dierential Phase <1 degree
Dierential Gain <1%
General Specications
Size 5.625” W x 0.8” H x 5.5” D
(143 mm x 20 mm x 140 mm)
including connectors
Power 12 volts, 4 watts
(100-230 VAC modular power
supply not included)
Temperature Range 0 to 40° C ambient
Relative Humidity 0 to 95%, non-condensing
Reclocker
Deserializer
SD SDI Out
Optical In
SD SDI In
C, Pr, R Out
Cpst, Y, G Out
Y, Pb, B Out
12 bit
D to A
Converter
and
Video
Encoder